Difference between revisions of "MSS60 Error: 27B2, P1412"
From Wiki-DIY
(Created page with "{| | | |- |'''Information saved in''' |DME |- |'''Fault code''' |27B0 - P0491 |- |'''Fault text''' |Secondary air system flow rate, bank 1 |- |'''Fault description''' |Seconda...") (Tag: Visual edit) |
(Tag: Visual edit) |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | __FORCETOC__ | |
| − | + | ||
| − | | | + | |
| + | ==== '''27B2 - P1412''' ==== | ||
| + | {| class = "diyTable ecuFault" | ||
|- | |- | ||
|'''Information saved in''' | |'''Information saved in''' | ||
| Line 7: | Line 9: | ||
|- | |- | ||
|'''Fault code''' | |'''Fault code''' | ||
| − | | | + | |27B2 - P1412 |
|- | |- | ||
|'''Fault text''' | |'''Fault text''' | ||
| − | |Secondary air system flow rate, | + | |Secondary air system flow rate, main branch |
|- | |- | ||
|'''Fault description''' | |'''Fault description''' | ||
| − | |Secondary Air | + | |Secondary Air Pump/Secondary Air Valve Large Leak |
|- | |- | ||
|'''Condition for fault identification''' | |'''Condition for fault identification''' | ||
| − | |Test condition: sls_obdh_mdf_max_intg_norm (after roughly 30s)<K_SLS_OBDH_MDF_MIN_DEF and | + | |Test condition: sls_obdh_mdf_max_intg_norm (after roughly 30s) < K_SLS_OBDH_MDF_MIN_DEF and |
|- | |- | ||
| − | | | + | | |
| − | |sls_obdh_lam_asv_intg_norm < k_SLS_OBDH_MDF_2_MAG or | + | |sls_obdh_lam_asv_intg_norm < k_SLS_OBDH_MDF_1_MAG and > k_SLS_OBDH_MDF_2_MAG or |
|- | |- | ||
| − | | | + | | |
| − | |||
| − | |||
| − | |||
|Terminal condition: Engine running | |Terminal condition: Engine running | ||
|- | |- | ||
| − | | | + | | |
|Voltage condition: Battery voltage > 10.8 V (k_sls_obd_ub_min) | |Voltage condition: Battery voltage > 10.8 V (k_sls_obd_ub_min) | ||
|- | |- | ||
| Line 34: | Line 33: | ||
|- | |- | ||
|'''Action in service''' | |'''Action in service''' | ||
| − | |1. | + | |1. Check main harness for leaks and replace secondary air line as indicated |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
|- | |- | ||
|'''Fault effect and breakdown warning''' | |'''Fault effect and breakdown warning''' | ||
Latest revision as of 20:27, 3 February 2015
Contents
27B2 - P1412
| Information saved in | DME |
| Fault code | 27B2 - P1412 |
| Fault text | Secondary air system flow rate, main branch |
| Fault description | Secondary Air Pump/Secondary Air Valve Large Leak |
| Condition for fault identification | Test condition: sls_obdh_mdf_max_intg_norm (after roughly 30s) < K_SLS_OBDH_MDF_MIN_DEF and |
| sls_obdh_lam_asv_intg_norm < k_SLS_OBDH_MDF_1_MAG and > k_SLS_OBDH_MDF_2_MAG or | |
| Terminal condition: Engine running | |
| Voltage condition: Battery voltage > 10.8 V (k_sls_obd_ub_min) | |
| Condition for fault memory entry | 30000 ms |
| Action in service | 1. Check main harness for leaks and replace secondary air line as indicated |
| Fault effect and breakdown warning | MIL is on after 2x engine cold start |
| Driver information | Warning light: MIL |
| Service instruction | None |
