Difference between revisions of "MSS60 Error: 2B20, P0222, P0223"

Revision as of 21:08, 3 February 2015

Information saved in	DME
Fault code	2B20 - P0222
Fault text	Throttle-valve sensor, bank 2
Fault description	Throttle/Pedal Position Sensor/Switch 'B' Circuit Low
Condition for fault identification	Test condition: Measured value <= 0.2V (K_EGAS_WDK_MIN)
	Terminal condition: TERM87
	Voltage condition: None
Condition for fault memory entry	100 ms
Action in service	1. Check plug and wiring harness,
	2. Check installation of throttle valve sensor DKG2,
	3. Replace DKG2
Fault effect and breakdown warning	CC message
	Engine speed limited
	Reduced power
	MIL after engine runs 2x
Driver information	Warning light: MIL, EML, CC message, backup program
Service instruction	None

Information saved in	DME
Fault code	2B20 - P0223
Fault text	Throttle-valve sensor, bank 2
Fault description	Throttle/Pedal Position Sensor/Switch 'B' Circuit High
Condition for fault identification	Test condition: Measured value >= 4.8V (K_EGAS_WDK_MAX)
	Terminal condition: TERM87
	Voltage condition: None
Condition for fault memory entry	100 ms
Action in service	1. Check plug and wiring harness,
	2. Check installation of throttle valve sensor DKG2,
	3. Replace DKG2
Fault effect and breakdown warning	CC message
	Engine speed limited
	Reduced power
	MIL after engine runs 2x
Driver information	Warning light: MIL, EML, CC message, backup program
Service instruction	None

@@ Line 1: / Line 1: @@
-{|
+__FORCETOC__
-|
-|
+==== '''2B20 - P0222''' ====
+{| class = "diyTable ecuFault"
 |-
 |'''Information saved in'''
@@ Line 56: / Line 58: @@
+==== '''2B20 - P0223''' ====
+{| class = "diyTable ecuFault"
-{|
-|
-|
 |-
 |'''Information saved in'''