Difference between revisions of "Engine Specs - S54 Connecting Rods"

Latest revision as of 20:22, 30 January 2016

TBD

@@ Line 1: / Line 1: @@
 __FORCETOC__
-== Rod Bolt Comparisons ==
+TBD
-=== OEM Rod Bolts ===
-==== SPEC: OEM: Torque procedure ====
-{| class = "diyTable bearingSpec"
-!Torque
-!Angle
-|-
-|20 Nm
-|130 degrees
-|-
-|Remove
-|
-|-
-|20 Nm
-|130 degrees
-|-
-|Remove
-|
-|-
-|20 Nm
-|130 degrees
-|}
-<br>
-Make sure you are starting with new rod bolts.  Factory rod bolts must be replaced once used.
-# Lubricate rod bolt threads and connecting rod cap bore holes with appropriate thread lubricant.
-# Torque to 20-Nm, then using a torque-angle gauge tighten another 130-degrees.
-# Remove bolts.
-# Repeat steps 1-3
-# Repeat steps 1, 2.
-<p></p>
-====SPEC: OEM: Clamping Force====
-* '''Clamping Force''':  Approximately 11000 pounds force.
-<p></p>