Difference between revisions of "MSS60 Error: 2729, P2298"
From Wiki-DIY
(Created page with "{| |'''Information saved in''' |DME |- |'''Fault code''' |2729 - P2298 |- |'''Fault text''' |Oxygen sensor, coast-mode diagnosis before cat., bank 2 |- |'''Fault description''...") (Tag: Visual edit) |
|||
| Line 1: | Line 1: | ||
| − | {| | + | ====2729 - P2298==== |
| + | {| class = "diyTable ecuFault" | ||
|'''Information saved in''' | |'''Information saved in''' | ||
|DME | |DME | ||
Latest revision as of 03:36, 12 January 2015
2729 - P2298
| Information saved in | DME |
| Fault code | 2729 - P2298 |
| Fault text | Oxygen sensor, coast-mode diagnosis before cat., bank 2 |
| Fault description | O2 Sensor Out of Range During Deceleration (Bank 2 Sensor 1) |
| Condition for fault identification | Test condition: Oxygen sensor is available (via sensor temperature, no error code entries, etc.) but the AD value is less than 3398mV (K_LAVK_OBD_SA_SCHW) for a number of 2 (K_LAVK_OBD_SA_CNT) measurements |
| . | Terminal condition: Engine running - overrun condition |
| . | Voltage condition: none |
| Condition for fault memory entry | none |
| Action in service | 1. Check plug and wiring harness to pre-cat oxygen sensor LSVK B2 (focus on opens in wires for virtual ground and pumping current) |
| . | 2. Replace oxygen sensor |
| Fault effect and breakdown warning | MIL on after engine runs 2x |
| Driver information | Warning light: MIL |
| Service instruction | none |
