MSS60 Error: 2B20, P0222, P0223
From Wiki-DIY
Revision as of 03:00, 5 February 2015 by Rcollins (talk | contribs) (Rcollins moved page MSS60 Error: 2B20, P0222, P0023 to MSS60 Error: 2B20, P0222, P0223 without leaving a redirect)
Contents
2B20 - P0222
| Information saved in | DME |
| Fault code | 2B20 - P0222 |
| Fault text | Throttle-valve sensor, bank 2 |
| Fault description | Throttle/Pedal Position Sensor/Switch 'B' Circuit Low |
| Condition for fault identification | Test condition: Measured value <= 0.2V (K_EGAS_WDK_MIN) |
| Terminal condition: TERM87 | |
| Voltage condition: None | |
| Condition for fault memory entry | 100 ms |
| Action in service | 1. Check plug and wiring harness, |
| 2. Check installation of throttle valve sensor DKG2, | |
| 3. Replace DKG2 | |
| Fault effect and breakdown warning | CC message |
| Engine speed limited | |
| Reduced power | |
| MIL after engine runs 2x | |
| Driver information | Warning light: MIL, EML, CC message, backup program |
| Service instruction | None |
2B20 - P0223
| Information saved in | DME |
| Fault code | 2B20 - P0223 |
| Fault text | Throttle-valve sensor, bank 2 |
| Fault description | Throttle/Pedal Position Sensor/Switch 'B' Circuit High |
| Condition for fault identification | Test condition: Measured value >= 4.8V (K_EGAS_WDK_MAX) |
| Terminal condition: TERM87 | |
| Voltage condition: None | |
| Condition for fault memory entry | 100 ms |
| Action in service | 1. Check plug and wiring harness, |
| 2. Check installation of throttle valve sensor DKG2, | |
| 3. Replace DKG2 | |
| Fault effect and breakdown warning | CC message |
| Engine speed limited | |
| Reduced power | |
| MIL after engine runs 2x | |
| Driver information | Warning light: MIL, EML, CC message, backup program |
| Service instruction | None |
