MSS60 Error: 2787, P3006

Information saved in	DME
Fault code	2787 - P3006
Fault text	Fuel pressure, setpoint/actual-value comparison, controlled operation
Fault description	Fuel Rail Pressure Pressure-Rate-Controlled, Pressure Too High
Condition for fault identification	Test condition: Deviation between actual/specified pressure < -15 % (K_PKS_OBD_LL_MIN)
	Terminal condition: Engine running
	Voltage condition: Battery voltage > 10.9V (k_pks_obd_ub_min)
Condition for fault memory entry	10000 ms
Action in service	1. Carry out test routine
	2. Check plug and wiring harness at fuel-pressure sensor, replace sensor as indicated
	3. Check plug and wiring harness at the fuel pump
	4. Check fuel filter and pump, replace as indicated
Fault effect and breakdown warning	CC message
	Engine speed limited
	Reduced power
	MIL after engine runs 2x
Driver information	Warning light: MIL, EML, CC message, backup program
Service instruction	None

Contents