MSS60 Error: 2B16, P0639, P1630, P210A
From Wiki-DIY
Information saved in | DME |
Fault code | 2B16 - P1630 |
Fault text | Throttle-valve actuator, governor monitoring, bank 2 |
Fault description | Throttle Valve Circuit (Bank 2) |
Condition for fault identification | Test condition: Actuator shifts to Failsafe mode |
Terminal condition: TERM87 | |
Voltage condition: none | |
Condition for fault memory entry | 10 ms |
Action in service | 1. Clear fault memory, conduct EDR electronic throttle control system test, |
2. Check plug and wiring harness at DKG2 and EDR2, | |
3. Replace DKG2 or EDR Bank 2 | |
Fault effect and breakdown warning | CC message |
Engine speed limited | |
Reduced power | |
MIL after engine runs 2x | |
Driver information | Warning light: MIL, EML, CC message, backup program |
Service instruction | None |
Information saved in | DME |
Fault code | 2B16 - P210A |
Fault text | Throttle-valve actuator, governor monitoring, bank 2 |
Fault description | Throttle Actuator 'B' Control Motor Circuit/Open |
Condition for fault identification | Test condition: Actuator shifts to Failsafe mode |
Terminal condition: TERM87 | |
Voltage condition: none | |
Condition for fault memory entry | 10 ms |
Action in service | 1. Clear fault memory, conduct EDR electronic throttle control system test, |
2. Check plug and wiring harness at DKG2 and EDR2, | |
3. Replace DKG2 or EDR Bank 2 | |
Fault effect and breakdown warning | CC message |
Engine speed limited | |
Reduced power | |
MIL after engine runs 2x | |
Driver information | Warning light: MIL, EML, CC message, backup program |
Service instruction | None |
Information saved in | DME |
Fault code | 2B16 - P0639 |
Fault text | Throttle-valve actuator, governor monitoring, bank 2 |
Fault description | Throttle Actuator Control Range/Performance (Bank 2) |
Condition for fault identification | Test condition: Actuator reports system error |
Terminal condition: TERM87 | |
Voltage condition: none | |
Condition for fault memory entry | 10 ms |
Action in service | 1. Clear fault memory, conduct EDR electronic throttle control system test, |
2. Check plug and wiring harness at DKG2 and EDR2, | |
3. Replace DKG2 or EDR Bank 2 | |
Fault effect and breakdown warning | CC message |
Engine speed limited | |
Reduced power | |
MIL after engine runs 2x | |
Driver information | Warning light: MIL, EML, CC message, backup program |
Service instruction | None |
Information saved in | DME |
Fault code | 2B16 - P0639 |
Fault text | Throttle-valve actuator, governor monitoring, bank 2 |
Fault description | Throttle Actuator Control Range/Performance (Bank 2) |
Condition for fault identification | Test condition: Actuator reports system error |
Terminal condition: TERM87 | |
Voltage condition: none | |
Condition for fault memory entry | 10 ms |
Action in service | 1. Clear fault memory, conduct EDR electronic throttle control system test, |
2. Check plug and wiring harness at DKG2 and EDR2, | |
3. Replace DKG2 or EDR Bank 2 | |
4. With UMWB engine protection check throttle valve assembly for stiction | |
Fault effect and breakdown warning | CC message |
Engine speed limited | |
Reduced power | |
MIL after engine runs 2x | |
Driver information | Warning light: MIL, EML, CC message, backup program |
Service instruction | None |