MSS60 Error: 2B37, P0303
From Wiki-DIY
| Information saved in | DME |
| Fault code | 2B37 - P0303 |
| Fault text | Misfire with cutoff, cyl. 3 |
| Fault description | Cylinder 3 Misfire Detected |
| Condition for fault identification | Test condition: 3.3V in miss window for at least 5 ms (K_AUSS_NS_TIME_MAX) or for entire miss window |
| Terminal condition: Terminal 15 | |
| Voltage condition: none | |
| Condition for fault memory entry | Varies according to load and rpm |
| Action in service | 1. Check spark plug, interchange with other plug or replace to localize malfunction. |
| 2. Run compression check. | |
| 3. Inspect cylinders to determine whether coolant and engine oil are entering. | |
| Fault effect and breakdown warning | CC message |
| Engine speed limited | |
| Reduced power | |
| MIL after engine runs 2x | |
| Rough idle | |
| Driver information | Warning light: MIL, EML, CC message, backup program |
| Service instruction | None |
