MSS60 Error: CDB6, UNK01

Information saved in	DME
Fault code	CDB6
Fault text	Diagnosis monitors the required torque.
Fault description	Malfunction monitoring conditions The fault is detected if the torque is higher than the required torque.
Condition for fault identification	Test condition:
	Temperature condition - None
	Time condition - None
	Other preconditions - None
	Terminal status - Terminal 15
	Voltage precondition: Vehicle voltage between 9V and 16V
Condition for fault memory entry	The fault is entered immediately.
Action in service	Carry out bus system analysis
Fault effect and breakdown warning	None
Driver information	None
Service instruction	None